Cabinet knob

Replace or add cabinet knobs

A round cabinet or drawer knob: drive a 4 mm screw through the door from the inside into the stem. Print a set in one colour for a quick kitchen refresh. Print it as shown, then turn it over so the floor becomes the top.

Customize this model

Size (Base A): Ø 34 mm, 16 mm tall
Shape: Round
Walls: 2.4 mm
Volume: 6.8 cm³
Est. weight (PLA): 8.5 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 13 steps

What’s in it

Round, Ø 34 mm, 16 mm tall, with 2.4 mm walls
1 hole in the floor
One more base built on (Base B)
Base B: round, Ø 16 mm, 12 mm tall (stacked)

How to print it

Print floor-down as shown, then turn it over to use it.

Filament: at most about 8.5 g of PLA printed solid (roughly $0.17 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the cabinet knob model?

The cabinet knob model measures Ø 34 mm, 16 mm tall. That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print floor-down as shown, then turn it over to use it.

How much filament does it use?

At most about 8.5 g of PLA (6.8 cm³ printed solid), roughly $0.17 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.