Bottom-pull sachet dispenser — 3D-printable model preview

AR view

Coffee & tea Multi-part assembly

Bottom-pull sachet dispenser

Take the oldest sachet first, from the bottom of the stack

Three columns for tea bags, sauce sachets or stock cubes. Load each column from the top and take from the slot at the bottom of the front: the oldest packet always comes out first and the stack drops down by itself. No more digging in torn boxes, and the lid keeps everything clean and flat.

Customize this model

Size: 230 × 80 × 110 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 411 cm³
Est. weight (PLA): 510 g
Parts to print: 2
Category: Coffee & tea
Made by: Krypto
Built in: 32 steps

What’s in it

Rectangular, 230 × 80 × 110 mm, with 2.0 mm walls
2 dividers
3 holes in the walls
Engraved text: “TEA”, “SAUCE”, “STOCK”
Lift-off lid (prints separately)

How to print it

For packets up to 70 mm wide. Needs a drawer 120 mm deep, with a finger's width in front of the slots.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 510 g of PLA printed solid (roughly $10.20 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the bottom-pull sachet dispenser model?

The bottom-pull sachet dispenser model measures 230 × 80 × 110 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. For packets up to 70 mm wide. Needs a drawer 120 mm deep, with a finger's width in front of the slots. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 510 g of PLA (411 cm³ printed solid), roughly $10.20 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More coffee & tea

Pagoda Stack

Store teas in storeys whose eaves are lids

Medium

Espresso puck leveller with depth flange

Level espresso grounds before tamping

Advanced

Loose-leaf tea portion scoop

Measure loose-leaf tea by the cup

Medium

Tea bag squeeze tongs

Lift and squeeze a hot tea bag cleanly

Simple

Coffee roast cooling tray

Cool freshly roasted coffee beans

Medium

Mug-top loose-leaf tea infuser with drip lid

Brew loose-leaf tea in any mug

Multi-part assembly

Coaster cabinet

Keep tea bags, sugar sachets and stirrers in a slim drawer under your mug

Multi-part assembly

Tip-jar war

Let customers vote with their tips between two rival answers

Advanced

See all 45 in Coffee & tea

Make it fit your space

Change the size, walls, dividers, holes and labels of the bottom-pull sachet dispenser model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model