Acrylic-pour drip station — 3D-printable model preview

AR view

Crafts & making Simple

Acrylic-pour drip station

Raise a canvas over a drip moat for acrylic pouring

A drip tray for acrylic pour painting. The canvas rests on a raised inner wall, so paint runs off the edges into the moat below instead of across the table. The cured skins peel out of the moat in one piece, ready to use in collage.

Customize this model

Size: 290 × 260 × 22 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 305 cm³
Est. weight (PLA): 378 g
Parts to print: 1
Category: Crafts & making
Made by: Krypto
Built in: 18 steps

What’s in it

Rectangular, 290 × 260 × 22 mm, with 2.4 mm walls

How to print it

Rest the canvas on the raised inner ring; scrape the cured drips out of the moat and reuse them as paint skins.

Prints as shown on its floor, no supports.

Filament: at most about 378 g of PLA printed solid (roughly $7.57 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the acrylic-pour drip station model?

The acrylic-pour drip station model measures 290 × 260 × 22 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Rest the canvas on the raised inner ring; scrape the cured drips out of the moat and reuse them as paint skins. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 378 g of PLA (305 cm³ printed solid), roughly $7.57 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More crafts & making

Paper-marbling comb

Comb floating paint into marbled paper patterns

Embroidery floss bobbin

Wind and label embroidery thread

Simple (set)

Kumihimo braiding disc

Braid cord and bracelets

Simple

Knitting yarn guide ring

Guide two yarns in colourwork knitting

Simple (set)

Lino-print ink slab and brayer rest

Roll out block-printing ink and rest the inked brayer

Simple

Stitch-marker dispenser

Tip out knitting stitch markers one at a time

Medium

Clay sculpting tool caddy

Stand clay sculpting tools and sponges beside the pottery wheel

Advanced

See all 73 in Crafts & making

Make it fit your space

Change the size, walls, dividers, holes and labels of the acrylic-pour drip station model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model