Keep a walking stick within reach
Clamps to the edge of a table or a counter and holds a walking stick upright in the ring, so it doesn't slide to the floor at a café or the dinner table.
Print lying flat in PETG.
Filament: at most about 26.2 g of PLA printed solid (roughly $0.52 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The walking stick table clip model measures 72 × 37 × 20 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
Usually not. Print lying flat in PETG.
At most about 26.2 g of PLA (21.1 cm³ printed solid), roughly $0.52 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the walking stick table clip model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.