Tall sofa-side caddy — 3D-printable model preview

AR view

Accessibility & daily living Advanced

Tall sofa-side caddy

Keep essentials within reach at standing height

A tall sofa-side caddy that brings your essentials up to hand height. A divided tray (130 × 200 mm) sits on a slim round column above a flat cross-shaped foot, with a deeper bin and a small cup stacked on top for extra storage. The column is a short bottom piece plus five 100 mm extensions that screw together with long, strong threads, and each column piece prints upright without supports. Stand it beside a sofa, bed or workbench to keep remotes, glasses, chargers, tools or snacks within easy reach, no bending down. Change the number or length of the extensions (50, 100 or 150 mm) to get the height you need.

Customize this model

Size (Base A): 130 × 200 × 10 mm
Shape: Cross-shaped
Walls: 5.0 mm
Volume: 1,117 cm³
Est. weight (PLA): 1,385 g
Parts to print: 1
Category: Accessibility & daily living
Made by: Krypto
Built in: 6 steps

What’s in it

Cross-shaped, 130 × 200 × 10 mm, with 5.0 mm walls
1 divider
4 holes in the floor
3 more bases built on (Bases B–D)
Base B: rectangular, 130 × 200 mm, 35 mm tall (stacked on a screw-in column with 5 × 100 mm extensions)
Base C: rectangular, 125 × 195 mm, 50 mm tall (stacked)
Base D: rectangular, 74 × 74 mm, 35 mm tall (stacked)

How to print it

Print the column pieces standing up with 4 walls and 20–25% infill; PETG gives a stiffer stand. Screw the pieces together by hand until they seat; don’t overtighten.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 1,385 g of PLA printed solid (roughly $27.71 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the tall sofa-side caddy model?

The tall sofa-side caddy model measures 130 × 200 × 10 mm (width × depth × height). That is Base A; 3 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print the column pieces standing up with 4 walls and 20–25% infill; PETG gives a stiffer stand. Screw the pieces together by hand until they seat; don’t overtighten. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 1,385 g of PLA (1,117 cm³ printed solid), roughly $27.71 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More accessibility & daily living

Rocking kettle tipper cradle

Pour a full kettle without lifting it

Simple

One-handed nail clipper press board

Cut fingernails with one hand

Simple

Drawer photo label frame

Show drawer contents with a picture

Simple

Walking stick table clip

Keep a walking stick within reach

Simple

Reading guide strip

Follow lines of text while reading

Simple

Tall two-tier sofa-side caddy

Keep essentials within reach at standing height

Advanced

Marble Braille cell

Learn the Braille alphabet by setting marbles in the six dot positions

Medium

Rollator walker tray

Carry a drink, phone and glasses on a rollator walker

Medium

See all 28 in Accessibility & daily living

Make it fit your space

Change the size, walls, dividers, holes and labels of the tall sofa-side caddy model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model