Hang or carry a tealight lantern
A tall round lantern with organic cell-shaped openings cut through the wall and a lid with a ring handle to hang or carry it. Light shows through in a cellular pattern.
Use an LED tealight; PLA softens with a real flame.
Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.
Filament: at most about 70.2 g of PLA printed solid (roughly $1.40 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).
The voronoi hanging lantern with ring-handle lid model measures Ø 85 mm, 100 mm tall. You can change every size in the free SO3D.xyz generator before you download it.
No. Use an LED tealight; PLA softens with a real flame. Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.
At most about 70.2 g of PLA (56.6 cm³ printed solid), roughly $1.40 of filament at $20 per kg. Normal infill uses less.
3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the voronoi hanging lantern with ring-handle lid model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.