Vented cheese cloche — 3D-printable model preview

AR view

Serving & table Multi-part assembly

Vented cheese cloche

Cover cheese at the table so it breathes but stays clean

A cheese cloche that breathes. The cover sits upside-down over the board, and its slotted upper band lets air move so the cheese doesn't sweat, while flies and dust stay out. The flat lid doubles as the board it stands on.

Customize this model

Size: 180 × 180 × 90 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 327 cm³
Est. weight (PLA): 405 g
Parts to print: 2
Category: Serving & table
Made by: Krypto
Built in: 22 steps

What’s in it

Rectangular, 180 × 180 × 90 mm, with 2.4 mm walls
1 patterned wall panel (cut-out)
Lift-off lid (prints separately)

How to print it

Print the cover, turn it over the cheese; the flat lid is the board underneath.

Print floor-down as shown, then turn it over to use it. The lid prints as a separate part, top down.

Filament: at most about 405 g of PLA printed solid (roughly $8.10 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the vented cheese cloche model?

The vented cheese cloche model measures 180 × 180 × 90 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print the cover, turn it over the cheese; the flat lid is the board underneath. Print floor-down as shown, then turn it over to use it. The lid prints as a separate part, top down.

How much filament does it use?

At most about 405 g of PLA (327 cm³ printed solid), roughly $8.10 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More serving & table

Steak doneness marker picks

Mark how each steak is cooked

Medium

Soup bowl tilting wedge

Tilt a bowl to reach the last spoonfuls

Medium

Popcorn bowl with kernel sifter

Serve popcorn without unpopped kernels

Advanced

Chopstick training connector

Help beginners use chopsticks

Simple

Banana hanger

Hang bananas so they ripen without bruising

Simple

Yin-yang dish pair

Make a round two-part dish from two interlocking halves

Simple (set)

Egg-dyeing station

Dye eggs in six colour wells and dry them upright

Advanced

S'mores station

Serve s'mores ingredients and roasting sticks at the fire pit

Medium

See all 131 in Serving & table

Make it fit your space

Change the size, walls, dividers, holes and labels of the vented cheese cloche model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model