S'mores station — 3D-printable model preview

AR view

Serving & table Medium

S'mores station

Serve s'mores ingredients and roasting sticks at the fire pit

A camp-fire station for s'mores: three bays for crackers, chocolate and marshmallows in assembly order, and a tall tube that holds the roasting sticks points-down. Hand it round the fire pit and everyone builds their own.

Customize this model

Size (Base A): 250 × 100 × 34 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 115 cm³
Est. weight (PLA): 143 g
Parts to print: 1
Category: Serving & table
Made by: Krypto
Built in: 28 steps

What’s in it

Rectangular, 250 × 100 × 34 mm, with 2.4 mm walls
2 dividers
Raised text: “S'MORES”
One more base built on (Base B)
Base B: round, Ø 50 mm, 100 mm tall (beside)

How to print it

Keep it well back from the fire; PETG copes better with warm evenings.

Prints as shown on its floor, no supports.

Filament: at most about 143 g of PLA printed solid (roughly $2.85 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the S'mores station model?

The S'mores station model measures 250 × 100 × 34 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Keep it well back from the fire; PETG copes better with warm evenings. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 143 g of PLA (115 cm³ printed solid), roughly $2.85 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More serving & table

Steak doneness marker picks

Mark how each steak is cooked

Medium

Soup bowl tilting wedge

Tilt a bowl to reach the last spoonfuls

Medium

Popcorn bowl with kernel sifter

Serve popcorn without unpopped kernels

Advanced

Chopstick training connector

Help beginners use chopsticks

Simple

Banana hanger

Hang bananas so they ripen without bruising

Simple

Egg-dyeing station

Dye eggs in six colour wells and dry them upright

Advanced

Vented cheese cloche

Cover cheese at the table so it breathes but stays clean

Multi-part assembly

Yin-yang dish pair

Make a round two-part dish from two interlocking halves

Simple (set)

See all 131 in Serving & table

Make it fit your space

Change the size, walls, dividers, holes and labels of the S'mores station model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model