Upturn Top

Turn an upturned bucket into a side table

A table top for an upturned bucket or planter. Print it, flip it, and the deep skirt drops over the base of a storage bucket, so a tub of blankets or toys becomes a side table with a flat top, and the bucket keeps its storage job.

Customize this model

Size: Ø 250 mm, 30 mm tall
Shape: Round
Walls: 3.0 mm
Volume: 209 cm³
Est. weight (PLA): 260 g
Parts to print: 1
Category: Sustainable living
Made by: Krypto
Built in: 5 steps

What’s in it

Round, Ø 250 mm, 30 mm tall, with 3.0 mm walls

How to print it

Set the diameter to the bucket base plus 4 mm.

Prints as shown on its floor, no supports.

Filament: at most about 260 g of PLA printed solid (roughly $5.19 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the upturn Top model?

The upturn Top model measures Ø 250 mm, 30 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Set the diameter to the bucket base plus 4 mm. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 260 g of PLA (209 cm³ printed solid), roughly $5.19 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.