Up-and-down wall sconce for an LED puck — 3D-printable model preview

AR view

Geometric & decorative Medium

Up-and-down wall sconce for an LED puck

Cast up and down light from an LED puck

Stick a battery LED puck light to the inside of the back wall and hang the sconce on two screws: light washes up through the open top and down through the floor opening onto the wall, while a soft glow leaks through the slotted front. No wiring needed.

Customize this model

Size: 160 × 80 × 140 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 38.3 cm³
Est. weight (PLA): 47.5 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 17 steps

What’s in it

Rectangular, 160 × 80 × 140 mm, with 2.4 mm walls
1 hole in the floor
1 patterned wall panel (cut-out)

How to print it

Prints as shown on its floor, no supports.

Filament: at most about 47.5 g of PLA printed solid (roughly $0.95 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the up-and-down wall sconce for an LED puck model?

The up-and-down wall sconce for an LED puck model measures 160 × 80 × 140 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 47.5 g of PLA (38.3 cm³ printed solid), roughly $0.95 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More geometric & decorative

Catenary arch riser pair

Lift a shelf board on two compression arches

Simple (set)

Desktop suikinkutsu water harp

Turn dripping water into bell-like sounds

Medium

Hilbert curve incense clock

Time and scent a room with an incense trail

Hanging planter for trailing plants

Hang a trailing plant

Medium

Prime-sequence acoustic diffuser tile

Scatter sound reflections in a small studio

Medium (set)

Hanging Savonius wind spinner

Spin in the wind as a garden mobile

Simple

String-gnomon garden sundial

Tell solar time from a string shadow

Advanced

See all 85 in Geometric & decorative

Make it fit your space

Change the size, walls, dividers, holes and labels of the up-and-down wall sconce for an LED puck model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model