Umbrella-drip fern planter — 3D-printable model preview

AR view

Garden & plants Medium

Umbrella-drip fern planter

Stand wet umbrellas where their drips water a fern beside them

Wet umbrellas drip, and plants need water: this stand puts the two together. Folding umbrellas and walking sticks go in the tall tube; the rainwater runs down to a small hole at the bottom and trickles into the pebble layer of the planter beside it, where a fern or ivy drinks it up. No puddle in the hall, no watering can, and the doorway gets a living plant.

Customize this model

Size (Base A): Ø 110 mm, 240 mm tall
Shape: Round
Walls: 2.4 mm
Volume: 229 cm³
Est. weight (PLA): 284 g
Parts to print: 1
Category: Garden & plants
Made by: Krypto
Built in: 20 steps

What’s in it

Round, Ø 110 mm, 240 mm tall, with 2.4 mm walls
1 hole in the walls
Raised text: “DRIP FED”
One more base built on (Base B)
Base B: rectangular, 150 × 130 mm, 100 mm tall (beside)

How to print it

PETG. Put a layer of pebbles in the planter bottom so the fern's roots never sit in water.

Prints as shown on its floor, no supports.

Filament: at most about 284 g of PLA printed solid (roughly $5.68 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the umbrella-drip fern planter model?

The umbrella-drip fern planter model measures Ø 110 mm, 240 mm tall. That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG. Put a layer of pebbles in the planter bottom so the fern's roots never sit in water. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 284 g of PLA (229 cm³ printed solid), roughly $5.68 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More garden & plants

Plant stem support clip

Fix plant stems to canes

Simple

Garden cane connector

Build garden frames from canes

Medium (set)

Plant pot feet

Raise plant pots for drainage

Medium (set)

Seed tray dibber board

Make evenly spaced holes for sowing

Advanced

Solar garden light stake

Repair solar garden lights

Medium

Linnaeus flower-clock planter

Plant twelve flowers that open at different hours to tell the time

Advanced

House-martin nest cup

Give house martins a mud-textured nest cup under the eaves

Medium

Phone-cam bird feeder

Feed garden birds while an old phone films them close up

Multi-part assembly

See all 93 in Garden & plants

Make it fit your space

Change the size, walls, dividers, holes and labels of the umbrella-drip fern planter model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model