Tensegrity floating display stand — 3D-printable model preview

AR view

Geometric & decorative Simple (set)

Tensegrity floating display stand

Float a display shelf on tensioned lines

Print two and set one upside down over the other with the hooked arms overlapping: a short line between the hooks and two lines at the outer corners hold the top half floating in mid-air, a tensegrity table for a plant, a speaker or a trophy.

Customize this model

Size: 150 × 120 × 15 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 52.0 cm³
Est. weight (PLA): 64.5 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 150 × 120 × 15 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print two, profile on the bed; tie with 0.5 mm fishing line in the notches.

Prints as shown on its outline, no supports.

Filament: at most about 64.5 g of PLA printed solid (roughly $1.29 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the tensegrity floating display stand model?

The tensegrity floating display stand model measures 150 × 120 × 15 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print two, profile on the bed; tie with 0.5 mm fishing line in the notches. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 64.5 g of PLA (52.0 cm³ printed solid), roughly $1.29 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More geometric & decorative

Catenary arch riser pair

Lift a shelf board on two compression arches

Simple (set)

Desktop suikinkutsu water harp

Turn dripping water into bell-like sounds

Medium

Hilbert curve incense clock

Time and scent a room with an incense trail

Hanging planter for trailing plants

Hang a trailing plant

Medium

Cascading cup tabletop fountain

Make a small tabletop water cascade

Advanced

Candle clock scribing sleeve

Mark hour rings on a candle

Medium

Hanging Savonius wind spinner

Spin in the wind as a garden mobile

Simple

See all 85 in Geometric & decorative

Make it fit your space

Change the size, walls, dividers, holes and labels of the tensegrity floating display stand model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model