Tennis overgrip and dampener caddy — 3D-printable model preview

AR view

Sport & fitness Multi-part assembly

Tennis overgrip and dampener caddy

Keep tennis overgrips and string dampeners together in the racket bag

A racket-bag caddy for tennis and padel players. Rolled overgrips stand in the tall tube, string dampeners and finishing tape sit in the two small bays, and the lid keeps sweat and dust out. The fresh grip is ready at the changeover.

Customize this model

Size (Base A): 120 × 64 × 34 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 133 cm³
Est. weight (PLA): 165 g
Parts to print: 3
Category: Sport & fitness
Made by: Krypto
Built in: 27 steps

What’s in it

Rectangular, 120 × 64 × 34 mm, with 2.4 mm walls
1 divider
Lift-off lid (prints separately)
One more base built on (Base B)
Base B: round, Ø 38 mm, 100 mm tall (beside)

How to print it

The tube takes three rolled overgrips; dampeners go in the small bays.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down. The added base's lid prints separately.

Filament: at most about 165 g of PLA printed solid (roughly $3.31 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the tennis overgrip and dampener caddy model?

The tennis overgrip and dampener caddy model measures 120 × 64 × 34 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. The tube takes three rolled overgrips; dampeners go in the small bays. Prints as shown on its floor, no supports. The lid prints as a separate part, top down. The added base's lid prints separately.

How much filament does it use?

At most about 165 g of PLA (133 cm³ printed solid), roughly $3.31 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More sport & fitness

Skateboard bearing press with depth flange

Press skate bearings into wheels squarely

Medium

Forearm wrist roller tube

Train forearms and grip with a rolled weight

Medium

Ab roller wheel for a broom handle

Make an ab roller from a wheel and a dowel

Medium

Skipping rope handles

Make a skipping rope

Simple (set)

Pointe-shoe care kit

Keep toe pads, ribbons and sewing needles for ballet pointe shoes

Multi-part assembly

Pétanque boule carrier

Carry three pétanque boules and the jack together

Advanced

Hockey tape and wax caddy

Keep hockey stick tape rolls and wax in the kit bag

Advanced

Ball pump and needle keeper

Keep a ball pump and its inflation needles together

Multi-part assembly

See all 28 in Sport & fitness

Make it fit your space

Change the size, walls, dividers, holes and labels of the tennis overgrip and dampener caddy model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model