Tagstone

Remember a pet with its own collar and tag

A memorial for a much-loved pet. Loop the old collar around the narrow neck of the stele, where the tag hangs at the front, and keep a lock of fur or a favourite treat under the little lid on top. The base carries the name, the years and a paw print.

Customize this model

Size (Base A): 90 × 50 × 64 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 34.4 cm³
Est. weight (PLA): 42.7 g
Parts to print: 2
Category: Pets & aquarium
Made by: Krypto
Built in: 39 steps

What’s in it

Rectangular, 90 × 50 × 64 mm, with 2.4 mm walls
Engraved and raised text: “BISCUIT”, “2011 2025”, “Label”
2 more bases built on (Bases B–C)
Base B: rectangular, 90 × 50 mm (stacked)
Base C: rectangular, 56 × 30 mm, 46 mm tall (stacked)

How to print it

Print in a calm neutral; the lidded neck prints as one piece.

Prints as shown on its floor, no supports. The added base's lid prints separately. Stacked parts are fused into one print.

Filament: at most about 42.7 g of PLA printed solid (roughly $0.85 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the tagstone model?

The tagstone model measures 90 × 50 × 64 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in a calm neutral; the lidded neck prints as one piece. Prints as shown on its floor, no supports. The added base's lid prints separately. Stacked parts are fused into one print.

How much filament does it use?

At most about 42.7 g of PLA (34.4 cm³ printed solid), roughly $0.85 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.