Burdock Rake

Lift pet hair from sofas, car seats and beds

A pet hair remover that works like a burr. Burdock hooks catch fur and let go one way only; the edge of this rake is a row of small raked hooks, so a pull across the sofa gathers hair into a roll and a push releases it. Hang it by the hole in the handle.

Customize this model

Size: 100 × 110 × 11 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 28.3 cm³
Est. weight (PLA): 35.1 g
Parts to print: 1
Category: Pets & aquarium
Made by: Krypto
Built in: 8 steps

What’s in it

Custom outline, 100 × 110 × 11 mm, with 5.0 mm walls
Custom outline traced from a shape
1 hole in the floor

How to print it

PETG or TPU edge; print flat.

Filament: at most about 35.1 g of PLA printed solid (roughly $0.70 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the burdock Rake model?

The burdock Rake model measures 100 × 110 × 11 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. PETG or TPU edge; print flat.

How much filament does it use?

At most about 35.1 g of PLA (28.3 cm³ printed solid), roughly $0.70 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.