Store A4 letters in a stackable drawer
A wide single drawer for A4 letters with a stacking base.
Prints as shown on its floor, no supports. The drawer prints separately from the case.
Filament: at most about 654 g of PLA printed solid (roughly $13.08 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The stackable letter drawer model measures 300 × 230 × 60 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. The drawer prints separately from the case.
At most about 654 g of PLA (527 cm³ printed solid), roughly $13.08 of filament at $20 per kg. Normal infill uses less.
2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the stackable letter drawer model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.