Display clog shoe charms pushed into a pegboard tray
A collector's board for clog shoe charms. Their stems push into the perforated floor so the whole collection is on show, ready to be swapped onto shoes in seconds, and none get lost in a pencil case.
Charm stems push into the floor holes; hang it through the keyholes or stand it on a shelf.
Prints as shown on its floor, no supports.
Filament: at most about 73.1 g of PLA printed solid (roughly $1.46 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The shoe-charm pegboard tray model measures 200 × 140 × 14 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Charm stems push into the floor holes; hang it through the keyholes or stand it on a shelf. Prints as shown on its floor, no supports.
At most about 73.1 g of PLA (58.9 cm³ printed solid), roughly $1.46 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the shoe-charm pegboard tray model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.