Shampoo-bar travel tin with raised ledge — 3D-printable model preview

AR view

Bath & body care Multi-part assembly

Shampoo-bar travel tin with raised ledge

Carry a shampoo bar without it going soggy

A travel tin for a solid shampoo or soap bar. A ledge round the inside holds the bar up off the floor so it can drain and dry, and drain holes let the water out. The lid keeps it in your bag.

Customize this model

Size: 85 × 85 × 45 mm
Shape: Square
Walls: 2.0 mm
Volume: 104 cm³
Est. weight (PLA): 129 g
Parts to print: 3
Category: Bath & body care
Made by: Krypto
Built in: 19 steps

What’s in it

Square, 85 × 85 × 45 mm, with 2.0 mm walls
4 holes in the floor
Friction-fit lid (prints separately)

How to print it

Leave the lid off overnight so the bar dries hard.

Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 129 g of PLA printed solid (roughly $2.58 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the shampoo-bar travel tin with raised ledge model?

The shampoo-bar travel tin with raised ledge model measures 85 × 85 × 45 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Leave the lid off overnight so the bar dries hard. Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 129 g of PLA (104 cm³ printed solid), roughly $2.58 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More bath & body care

Aligner soak basket with lift tab

Soak aligners and lift them out hands-free

Advanced

Shower head descaling soak cup

Descale a fixed shower head without removing it

Simple

Barbed drain hair hook strip

Pull hair clogs out of basin drains

Simple

Pedicure toe separators

Keep toes apart while painting toenails

Simple (set)

Reed diffuser vessel

Scent a room with reeds

Medium

Honeycomb-drain pedestal soap dish

Keep a bar of soap dry on the basin

Medium

Low-poly faceted toothbrush cup

Hold toothbrushes by the basin

Medium

Submarine bath-tea infuser

Hang a pierced submarine of bath herbs under the hot tap

Multi-part assembly

See all 54 in Bath & body care

Make it fit your space

Change the size, walls, dividers, holes and labels of the shampoo-bar travel tin with raised ledge model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model