Store rolled scarves and ties in drawers
Twelve cells that keep rolled scarves and ties tidy in a wardrobe drawer.
Prints as shown on its floor, no supports.
Filament: at most about 436 g of PLA printed solid (roughly $8.72 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The scarf and tie roll organizer model measures 300 × 220 × 90 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 436 g of PLA (352 cm³ printed solid), roughly $8.72 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the scarf and tie roll organizer model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.