Make a parrot forage for its treats
Parrots are made to forage. This cube is round-holed on every side and split into four chambers, so treats stuffed in with shredded paper have to be found and worked out beak-first. It sits on a cage floor or perch tray.
Bird-safe use: print in natural PLA, check for loose strings each week and remove if chewed sharp.
Prints as shown on its floor, no supports.
Filament: at most about 83.9 g of PLA printed solid (roughly $1.68 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The parrot foraging cube model measures 110 × 110 × 110 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Bird-safe use: print in natural PLA, check for loose strings each week and remove if chewed sharp. Prints as shown on its floor, no supports.
At most about 83.9 g of PLA (67.7 cm³ printed solid), roughly $1.68 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the parrot foraging cube model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.