Park the mouse out of the way
Park the mouse under a little roof at the end of the day so it stays dust-free and out of the way; the cable runs out through a hole in the back. Print it as shown, then turn it over so the floor becomes the top.
Print floor-down as shown, then turn it over to use it.
Filament: at most about 41.4 g of PLA printed solid (roughly $0.83 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The mouse garage model measures 90 × 140 × 50 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
Usually not. Print floor-down as shown, then turn it over to use it.
At most about 41.4 g of PLA (33.4 cm³ printed solid), roughly $0.83 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the mouse garage model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.