Build a stackable honeycomb wine rack
One cell of a honeycomb wine rack: print several, lay them on their sides and stack them. The bottle slides in neck first, its shoulder resting against the end wall while the neck pokes through.
Prints as shown on its floor, no supports.
Filament: at most about 144 g of PLA printed solid (roughly $2.87 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The modular hexagon wine cell model measures 100 × 100 × 150 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 144 g of PLA (116 cm³ printed solid), roughly $2.87 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the modular hexagon wine cell model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.