Start seedlings with good drainage on a windowsill
A shallow seed tray lifted on four slim hairpin legs, with a honeycomb cut through the floor so water drains and air can reach the roots.
The legs print separately, standing on their pads.
Prints as shown on its floor, no supports.
Filament: at most about 88.0 g of PLA printed solid (roughly $1.76 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).
The hairpin-leg seed starter tray with honeycomb drain model measures 200 × 130 × 68 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. The legs print separately, standing on their pads. Prints as shown on its floor, no supports.
At most about 88.0 g of PLA (70.9 cm³ printed solid), roughly $1.76 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the hairpin-leg seed starter tray with honeycomb drain model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.