Show off a succulent on a raised pedestal planter
A round planter with a brick pattern all round, standing on a flared pedestal. Line it with a saucer or use it for succulents in a plastic nursery pot.
Print the pedestal on its wide end, it needs no supports.
Prints as shown on its floor, no supports.
Filament: at most about 174 g of PLA printed solid (roughly $3.48 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).
The brick-wall planter on a flared foot model measures Ø 110 mm, 105 mm tall. You can change every size in the free SO3D.xyz generator before you download it.
No. Print the pedestal on its wide end, it needs no supports. Prints as shown on its floor, no supports.
At most about 174 g of PLA (140 cm³ printed solid), roughly $3.48 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the brick-wall planter on a flared foot model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.