Gridfinity polarity-keeping magnet dispenser — 3D-printable model preview

AR view

Gridfinity system Simple

Gridfinity polarity-keeping magnet dispenser

Fit Gridfinity magnets with matching polarity

Stack a column of 6 x 2 mm magnets in the tube: they line up north to south by themselves, so the bottom one always shows the same pole. Press the tube over a bin's magnet pocket, push the stack down with a pencil and slide away, and every bin in the drawer gets the same polarity.

Customize this model

Size: Ø 14 mm, 70 mm tall
Shape: Round
Walls: 4.0 mm
Volume: 5.1 cm³
Est. weight (PLA): 6.3 g
Parts to print: 1
Category: Gridfinity system
Made by: Krypto
Built in: 13 steps

What’s in it

Round, Ø 14 mm, 70 mm tall, with 4.0 mm walls
1 hole in the floor
Engraved text: “UP”

How to print it

Check the 6 mm bore holds magnets with light friction.

Prints as shown on its floor, no supports.

Filament: at most about 6.3 g of PLA printed solid (roughly $0.13 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the Gridfinity polarity-keeping magnet dispenser model?

The Gridfinity polarity-keeping magnet dispenser model measures Ø 14 mm, 70 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Check the 6 mm bore holds magnets with light friction. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 6.3 g of PLA (5.1 cm³ printed solid), roughly $0.13 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More gridfinity system

Gridfinity drawer planning gauge

Plan Gridfinity grids and bin heights

Simple

Gridfinity bin shelf-edge hanger

Hang Gridfinity bins on a shelf edge

Simple (set)

Gridfinity baseplate locking wedge

Lock a Gridfinity baseplate tight in a drawer

Simple

Gridfinity starter set

Start a Gridfinity grid with baseplate

Multi-part assembly

Gridfinity 1x3 scoop bin with label

Store small parts in a Gridfinity bin

Simple

Gridfinity 2x2 tool well

Hold bulky tools in a deep bin

Simple

Gridfinity 3x1 screwdriver tray

Sort three screwdrivers in lanes

Medium

Gridfinity 2x3 parts sorter

Sort small parts in six cells

Medium

See all 26 in Gridfinity system

Make it fit your space

Change the size, walls, dividers, holes and labels of the Gridfinity polarity-keeping magnet dispenser model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model