Gridfinity baseplate locking wedge — 3D-printable model preview

AR view

Gridfinity system Simple

Gridfinity baseplate locking wedge

Lock a Gridfinity baseplate tight in a drawer

Drawers are never an exact number of 42 mm units. Push a pair of these tapered wedges between the baseplate and the drawer side, from opposite ends: they close any gap from 4 to 16 mm and lock the grid, so the bins no longer shift when the drawer slams.

Customize this model

Size: 132 × 22 × 10 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 12.1 cm³
Est. weight (PLA): 15.0 g
Parts to print: 1
Category: Gridfinity system
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 132 × 22 × 10 mm, with 4.0 mm walls
Custom outline traced from a shape

How to print it

Print in pairs.

Prints as shown on its outline, no supports.

Filament: at most about 15.0 g of PLA printed solid (roughly $0.30 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the Gridfinity baseplate locking wedge model?

The Gridfinity baseplate locking wedge model measures 132 × 22 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in pairs. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 15.0 g of PLA (12.1 cm³ printed solid), roughly $0.30 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More gridfinity system

Gridfinity bin shelf-edge hanger

Hang Gridfinity bins on a shelf edge

Simple (set)

Gridfinity drawer planning gauge

Plan Gridfinity grids and bin heights

Simple

Gridfinity polarity-keeping magnet dispenser

Fit Gridfinity magnets with matching polarity

Simple

Gridfinity starter set

Start a Gridfinity grid with baseplate

Multi-part assembly

Gridfinity 1x3 scoop bin with label

Store small parts in a Gridfinity bin

Simple

Gridfinity 2x2 tool well

Hold bulky tools in a deep bin

Simple

Gridfinity 3x1 screwdriver tray

Sort three screwdrivers in lanes

Medium

Gridfinity 2x3 parts sorter

Sort small parts in six cells

Medium

See all 26 in Gridfinity system

Make it fit your space

Change the size, walls, dividers, holes and labels of the Gridfinity baseplate locking wedge model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model