Store rings and keepsakes in a boxed trinket pot
A round trinket box with a Greek-key band all the way round and a lid with a small knob. For rings, studs and small keepsakes.
Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.
Filament: at most about 82.8 g of PLA printed solid (roughly $1.66 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).
The greek-key jewellery trinket box model measures Ø 100 mm, 40 mm tall. You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.
At most about 82.8 g of PLA (66.8 cm³ printed solid), roughly $1.66 of filament at $20 per kg. Normal infill uses less.
3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the greek-key jewellery trinket box model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.