Double-deck sliding cutlery drawer — 3D-printable model preview

AR view

Kitchen organisers Advanced

Double-deck sliding cutlery drawer

Double the cutlery storage in an ordinary drawer

Two layers of cutlery storage in the footprint of one. Everyday knives, forks and spoons sit in a four-lane top deck that rides on the side walls of the tray below; slide it back to reach serving spoons, cake forks and party cutlery in the six bays of the lower deck. A lip under the deck keeps it on track.

Customize this model

Size (Base A): 240 × 240 × 70 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 487 cm³
Est. weight (PLA): 604 g
Parts to print: 1
Category: Kitchen organisers
Made by: Krypto
Built in: 16 steps

What’s in it

Rectangular, 240 × 240 × 70 mm, with 2.0 mm walls
8 dividers
One more base built on (Base B)
Base B: rectangular, 240 × 120 mm, 32 mm tall (stacked)

How to print it

Needs a drawer at least 75 mm deep inside. Print the deck separately.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 604 g of PLA printed solid (roughly $12.08 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the double-deck sliding cutlery drawer model?

The double-deck sliding cutlery drawer model measures 240 × 240 × 70 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Needs a drawer at least 75 mm deep inside. Print the deck separately. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 604 g of PLA (487 cm³ printed solid), roughly $12.08 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More kitchen organisers

Shukhov Base

Build a hyperboloid crock from straight skewers

Simple

Shukhov Collar

Twist straight skewers into a hyperboloid waist

Simple

Drawer-front peelings bag hook

Hang a scraps bag under the chopping board

Simple (set)

Mixing bowl tilt ring

Hold a mixing bowl steady at an angle

Simple

Flour canister levelling bar

Level measuring scoops over the canister

Simple

Made-to-measure drawer bin grid

Fill any drawer exactly with bins you can swap around

Simple

Chef's workflow tool rail

Give each cooking tool its own shaped home, in cooking order

Advanced

Variable-slot bakeware and lid file

Stand bakeware and lids on edge so you can lift out just one

Advanced

See all 94 in Kitchen organisers

Make it fit your space

Change the size, walls, dividers, holes and labels of the double-deck sliding cutlery drawer model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model