Stop stacks toppling on wardrobe shelves
Slide it over the front of a wardrobe shelf up to 19 mm thick and it stands upright to stop stacks of jumpers, towels or bags toppling into each other.
Prints flat as a plate, no supports.
Filament: at most about 208 g of PLA printed solid (roughly $4.17 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The closet shelf divider model measures 150 × 240 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints flat as a plate, no supports.
At most about 208 g of PLA (168 cm³ printed solid), roughly $4.17 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the closet shelf divider model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.