Aroma Stele

Diffuse essential oil from a hidden felt strip

A slim standing stone for scent without flame or power. Drip essential oil onto a strip of wool felt, drop it inside and close the cap: air drifts through the carved vertical slots on both faces and carries the scent, while the felt stays hidden and the oil never touches the furniture.

Customize this model

Size: 56 × 40 × 170 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 22.4 cm³
Est. weight (PLA): 27.8 g
Parts to print: 2
Category: Geometric & decorative
Made by: Krypto
Built in: 25 steps

What’s in it

Rectangular, 56 × 40 × 170 mm, with 2.4 mm walls
2 patterned wall panels (cut-out)
Telescoping lid (prints separately)

How to print it

PETG resists oils better than PLA.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 27.8 g of PLA printed solid (roughly $0.56 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the aroma Stele model?

The aroma Stele model measures 56 × 40 × 170 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG resists oils better than PLA. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 27.8 g of PLA (22.4 cm³ printed solid), roughly $0.56 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.