Route airline tube and cables on a tank
Hooks over the rim of an aquarium up to 10 mm thick and holds an airline tube or a heater cable neatly in the corner, so it doesn't float about the tank.
Prints flat as a plate, no supports.
Filament: at most about 4.5 g of PLA printed solid (roughly $0.09 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The aquarium airline and cable clip model measures 34 × 51 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints flat as a plate, no supports.
At most about 4.5 g of PLA (3.6 cm³ printed solid), roughly $0.09 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the aquarium airline and cable clip model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.