Give small pets tunnels to explore
A tunnel section for hamster and gerbil cages: lay several end to end through the bedding to make burrows, and the hole on top lets air in.
Print lying on its side, or as it comes.
Prints as shown on its floor, no supports.
Filament: at most about 6.5 g of PLA printed solid (roughly $0.13 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The hamster tunnel section model measures 60 × 60 × 120 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Print lying on its side, or as it comes. Prints as shown on its floor, no supports.
At most about 6.5 g of PLA (5.3 cm³ printed solid), roughly $0.13 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the hamster tunnel section model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.