Build with SO3D.xyz
Customize and change just what matters (sizes, text).
Remake opens every setting and tab with more customize option.
Base A
▶Base type
▶Base bottom
Grip size
Support base height
Support base grip size
Pedestal flare
Pedestal surface
Leg style
Stand shape
Runs along the tray's longer side. Stand width sets how wide its foot is.
Tilt
Legs on
A low wall on the edge that rests on the table, so nothing slides off.
Lip height
Top handle
Handle height
Sits in the centre of the top-most base and screws on. Printed separately.
Width
Depth
Height
Wall thickness
▶Gridfinity
Snaps to the 42 mm Gridfinity grid with the standard feet, so it clicks into any Gridfinity baseplate.
Stack test
▶Outer walls
▶Outer corners
▶Inner wall
Inner wall offset
Inner wall height
Inner wall thickness
▶Handy extras
A rounded dip in the top of the wall, so things are easy to grab.
Keyhole slots in the back wall, to hang it on screws.
A small frame on the front wall that holds a paper label.
A low front, with the side walls sloping down to it, so you can reach in from the front.
The base steps in so it sits inside the top of the same bin, and you can stack as many as you like.
▶Holes
▶Lid
Another base sits on top of Base A, so Base A can't have a lid. Put the lid on the top base instead.
Preview layout
Lid style
Needs a Square or Rectangular base with the front wall (A1) removed to slide through — otherwise this falls back to a flat lid.
Thread fit
Neck size
Shelf width
Handle
Handle mount
Handle mount height
Grip size
▶Drawer sleeve
Square/Rectangular bases only -- other shapes have no straight parallel walls for the sleeve to slide against, so this has no effect on them.
Fit
Drawers
Handle
▶Dividers
Divider layout
SIZE
Number of cells
▶Radial dividers
Sections
Rotation
Thickness
Height
Center compartment
▶Shape pocket
Fill the inside with a solid insert that has a cut-out in the shape of your tool or object — pick a ready-made one from the Pocket library, or trace your own from a photo taken from above.
Clearance is extra room around the shape, so the object drops in easily.
▶Text & Icon
▶Wall design
Print time
Cell fit
▶History
Every edit you make lands here. Press Play to watch the model build itself from the first step to the last.