Hang a potted plant on the wall
A wall planter with a lower front lip, sized for a 12 cm nursery pot so watering never drips down the wall, hung from two keyholes.
Prints as shown on its floor, no supports.
Filament: at most about 55.4 g of PLA printed solid (roughly $1.11 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The wall pocket planter model measures 160 × 80 × 130 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 55.4 g of PLA (44.7 cm³ printed solid), roughly $1.11 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the wall pocket planter model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.