Hold toothbrushes over a drip floor
Three toothbrush bays over a honeycomb drip floor, with rounded corners.
Prints as shown on its floor, no supports.
Filament: at most about 62.2 g of PLA printed solid (roughly $1.24 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The toothbrush caddy with drip floor model measures 160 × 80 × 100 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 62.2 g of PLA (50.2 cm³ printed solid), roughly $1.24 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the toothbrush caddy with drip floor model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.