Shelter toads and frogs in the garden
A shady garden house with an arched door for toads and frogs. Print it as shown, then turn it over so the floor becomes the top.
Print floor-down as shown, then turn it over to use it. Large holes in the walls may need supports or good bridging.
Filament: at most about 77.2 g of PLA printed solid (roughly $1.54 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The toad house model measures 150 × 150 × 110 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
It may need supports in places. Print floor-down as shown, then turn it over to use it. Large holes in the walls may need supports or good bridging.
At most about 77.2 g of PLA (62.3 cm³ printed solid), roughly $1.54 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the toad house model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.