Reptile egg-hatching box with raised egg ledge — 3D-printable model preview

AR view

Pets & aquarium Multi-part assembly

Reptile egg-hatching box with raised egg ledge

Hatch reptile eggs at the right humidity

An incubation box for gecko and other reptile eggs. Moist vermiculite goes in the bottom; a ledge round the walls holds a mesh or perforated tray above it so the eggs sit in damp air, not wet substrate. Vent holes in the lid and a label slot for the lay date.

Customize this model

Size: 150 × 150 × 75 mm
Shape: Square
Walls: 2.0 mm
Volume: 303 cm³
Est. weight (PLA): 376 g
Parts to print: 2
Category: Pets & aquarium
Made by: Krypto
Built in: 38 steps

What’s in it

Square, 150 × 150 × 75 mm, with 2.0 mm walls
6 holes in the lid
Lift-off lid (prints separately)

How to print it

Cut a perforated plastic sheet to rest on the ledge. Never turn reptile eggs.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 376 g of PLA printed solid (roughly $7.52 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the reptile egg-hatching box with raised egg ledge model?

The reptile egg-hatching box with raised egg ledge model measures 150 × 150 × 75 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Cut a perforated plastic sheet to rest on the ledge. Never turn reptile eggs. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 376 g of PLA (303 cm³ printed solid), roughly $7.52 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More pets & aquarium

Reptile humid hide rock

Give a reptile a humid hide for shedding

Simple

Filter intake baby-shrimp guard

Stop baby shrimp being sucked into a filter

Advanced

Dog nail scratch board with treat box

Let a dog file its own nails

Multi-part assembly

Floating aquarium feeding ring

Contain floating fish food

Simple

Aquarium fish cave

Give aquarium fish a place to hide

Simple

Paw-icon raised pet bowl on fluted legs

Raise a cat or small dog bowl off the floor

Simple

Cat peek-a-boo play box

Keep an indoor cat busy fishing for toys

Multi-part assembly

Pet memorial urn with paw seal

Keep a much-loved pet's ashes safe at home

Multi-part assembly

See all 65 in Pets & aquarium

Make it fit your space

Change the size, walls, dividers, holes and labels of the reptile egg-hatching box with raised egg ledge model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model