Player-board edge track slider — 3D-printable model preview

AR view

Tabletop gaming & play Simple

Player-board edge track slider

Mark track positions that cannot be knocked off

Clips over the 2 mm edge of a player board and slides along it, with a pointed arm that reaches over the printed score or resource track: unlike a loose cube, the marker cannot be knocked off or nudged one space by an elbow, and the spring jaw holds it on the right square.

Customize this model

Size: 22 × 10 × 10 mm
Shape: Custom outline
Walls: 2.0 mm
Volume: 1.1 cm³
Est. weight (PLA): 1.4 g
Parts to print: 1
Category: Tabletop gaming & play
Made by: Krypto
Built in: 3 steps

What’s in it

Custom outline, 22 × 10 × 10 mm, with 2.0 mm walls
Custom outline traced from a shape

How to print it

Print one per track in each player colour; PETG springs best.

Prints as shown on its outline, no supports.

Filament: at most about 1.4 g of PLA printed solid (roughly $0.03 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the player-board edge track slider model?

The player-board edge track slider model measures 22 × 10 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print one per track in each player colour; PETG springs best. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 1.4 g of PLA (1.1 cm³ printed solid), roughly $0.03 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More tabletop gaming & play

Bead-and-loop rope puzzle

Solve a cord and bead disentanglement puzzle

Simple

Steady-hand buzz-wire game base

Build a steady-hand electric skill game

Multi-part assembly

Fidget spinner frame for 608 bearings

Spinning desk toy built around 608 bearings

Medium

Miniature condition rings

Mark miniature status in tabletop games

Simple (set)

Stackable flying altitude risers

Show how high a flying miniature is

Simple (set)

Shape-coded cube caps for colour-blind players

Make player pieces readable without colour

Simple (set)

Tipping plate balance game

Play a stacking and balancing game

Medium

Line-of-sight laser turret

Check true line of sight for a miniature

Simple

See all 73 in Tabletop gaming & play

Make it fit your space

Change the size, walls, dividers, holes and labels of the player-board edge track slider model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model