Hold pivoting coasters on one stem
The pivot base for Petal Coasters: a weighted 70 mm dish with a solid 10 mm stem. Drop the coasters on by their tip holes; they swing freely round the stem and fan into a flower or close into one teardrop.
Print upright, 4 walls for a stiff stem.
Prints as shown on its floor, no supports. Stacked parts are fused into one print.
Filament: at most about 26.0 g of PLA printed solid (roughly $0.52 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The petal Stem model measures Ø 70 mm, 12 mm tall. That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. Print upright, 4 walls for a stiff stem. Prints as shown on its floor, no supports. Stacked parts are fused into one print.
At most about 26.0 g of PLA (21.0 cm³ printed solid), roughly $0.52 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the petal Stem model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.