Store hole saws and arbor
A deep fitted case for five hole saws from 25 to 68 mm and their arbor, with a telescoping lid shown beside it.
Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
Filament: at most about 1,113 g of PLA printed solid (roughly $22.25 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The hole saw kit case model measures 200 × 150 × 50 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
At most about 1,113 g of PLA (897 cm³ printed solid), roughly $22.25 of filament at $20 per kg. Normal infill uses less.
2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the hole saw kit case model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.