Water grow-bag plants at the roots
Press it 3 cm into a grow bag round a tomato or pepper: water poured inside soaks down to the roots instead of running off the plastic, and the open grid floor lets you top up with extra compost for a deeper root run.
Print three per grow bag.
Prints as shown on its floor, no supports.
Filament: at most about 66.6 g of PLA printed solid (roughly $1.33 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The grow-bag watering collar model measures 180 × 180 × 90 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Print three per grow bag. Prints as shown on its floor, no supports.
At most about 66.6 g of PLA (53.7 cm³ printed solid), roughly $1.33 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the grow-bag watering collar model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.