Give four players their own snack arm at the table
A pinwheel snack tray for board-game night: four curved arms, one pointing at each player, so everyone eats from their own arm and nobody reaches across the board with greasy fingers.
Put it in the middle of the board-game table, one arm towards each seat.
Prints as shown on its floor, no supports.
Filament: at most about 156 g of PLA printed solid (roughly $3.11 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The game-night pinwheel snack tray model measures 260 × 260 × 26 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Put it in the middle of the board-game table, one arm towards each seat. Prints as shown on its floor, no supports.
At most about 156 g of PLA (126 cm³ printed solid), roughly $3.11 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the game-night pinwheel snack tray model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.