Serve dipping sauce with chopstick rests
A square dipping dish with notches in the front and back walls, so chopsticks rest across it.
Prints as shown on its floor, no supports.
Filament: at most about 30.3 g of PLA printed solid (roughly $0.61 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The dipping dish with chopstick notches model measures 100 × 100 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 30.3 g of PLA (24.4 cm³ printed solid), roughly $0.61 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the dipping dish with chopstick notches model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.