Carry cutlery and napkins to the table
Four tall lanes for knives, forks, spoons and napkins with carry notches front and back.
Prints as shown on its floor, no supports.
Filament: at most about 163 g of PLA printed solid (roughly $3.27 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The cutlery caddy with carry notches model measures 260 × 120 × 100 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 163 g of PLA (132 cm³ printed solid), roughly $3.27 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the cutlery caddy with carry notches model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.