Chess piece chest — 3D-printable model preview

AR view

Tabletop gaming & play Multi-part assembly

Chess piece chest

Store a full chess set in two drawers, one per side

A two-drawer chest for a travel chess set (kings up to about 55 mm): one drawer for white and one for black. Each drawer has six cells, so all 32 pieces lie down without knocking together. A crown sits on each drawer front.

Customize this model

Size: 100 × 150 × 42 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 308 cm³
Est. weight (PLA): 382 g
Parts to print: 3
Category: Tabletop gaming & play
Made by: Krypto
Built in: 13 steps

What’s in it

Rectangular, 100 × 150 × 42 mm, with 2.4 mm walls
3 dividers in a grid layout
Raised text: “Label”
2 pull-out drawers in a sleeve

How to print it

Print the sleeve upright and the two drawers flat; line the cells with felt for wooden pieces.

Prints as shown on its floor, no supports. The 2 drawers print separately from the case.

Filament: at most about 382 g of PLA printed solid (roughly $7.63 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the chess piece chest model?

The chess piece chest model measures 100 × 150 × 42 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print the sleeve upright and the two drawers flat; line the cells with felt for wooden pieces. Prints as shown on its floor, no supports. The 2 drawers print separately from the case.

How much filament does it use?

At most about 382 g of PLA (308 cm³ printed solid), roughly $7.63 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More tabletop gaming & play

Bead-and-loop rope puzzle

Solve a cord and bead disentanglement puzzle

Simple

Steady-hand buzz-wire game base

Build a steady-hand electric skill game

Multi-part assembly

Fidget spinner frame for 608 bearings

Spinning desk toy built around 608 bearings

Medium

Miniature condition rings

Mark miniature status in tabletop games

Simple (set)

Mahjong table hub

Keep dice and scoring sticks in the middle of a mahjong table

Multi-part assembly

Backgammon checker vault

Carry 30 backgammon checkers, dice and the doubling cube

Multi-part assembly

Shogi captured-piece stand

Hold captured shogi pieces beside the board

Medium (set)

Bridge bidding box

Hold contract bridge bidding cards at each seat

Medium (set)

See all 73 in Tabletop gaming & play

Make it fit your space

Change the size, walls, dividers, holes and labels of the chess piece chest model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model